CJ Autos (Heywood) Ltd

Car Lifts and Tilters. CT03 HEYWOOD

CAR LIFTS AND CAR TILTERS

The Autovip Car Rollers offers a choice of two models
1400 MODEL CT02
1700 MODEL CT03

They are both basically the same unit except
the 1400 Autovip has one locking mechanism.
and the 1700 Autovip has two locking mechanisms.
(one at the front and one at the rear to enable more stability for the heavier car).

Adaptor Beams can be purchased which enable the AUTOVIP ROLLER to turn your car, with or without axles and suspension, by bolting the beams to either bumper mounting or chassis. Fully adjustable.

The design of the AUTOVIP CAR ROLLER means that a vehicle can be mounted and tilted by
A SINGLE PERSON
using only a hydraulic jack on the jacking beam supplied with the kit.

This gives the mechanic, the enthusiast and the DIY motorist the opportunity to:

  • Rustproof the underside.
  • Do steel plate work
  • Control/weld/repair mechanical parts such as suspension,
    shock absorbers, brake pipes, etc.
  • Change or repair exhaust systems

    The AUTOVIP ROLLER offers great advantages:

    • Greatly improved working position
    • Unrestricted access to the underbody
    • No standing under the vehicle
    • No dirt in face and eyes while cleaning or rustproofing
    • Reduced risk of welding burns
    • Work in far better light




      You are never under the vehicle

      Turning in under 3 metres - place two smooth plates under the frame, then slide the car across. Knock on wheels can be turned by using adaptor beams which can be purchased as an optional extra.
      Min.width required 2.6m, 8ft.6ins.
      Height 2m,6ft.6ins.m



free page





NBN CHASSIS TILTER CT05

MANUFACTURED BY CJ AUTOS
OUR NBN STANDARD WAS USED ON TV BY MARK EVANS AN MG IS REBORN

PROFESSIONAL Heavy Duty NBN Chassis Tilter
This tilter will lift a full car or camper van weighing 2500 KG and rotate 360 degrees within it's own space.
Ideal for the professional restorer. We make around 300 brackets.

Car Lifts and Tilters. ct05 to heywood site


Car Lifts and Tilters. NBN MONTAGE1

CJ AUTOS NBN CHASSIS TILTER

THE VERSATILE
NBN CHASSIS TILTER


BUY ON LINE CLICK HERE

email us [email protected]

Grips the chassis - makes axle removal easy

NBN Chassis Tilter
"Nothing gives better access to your car's underside than this product"
practical CLASSICS...........
manufactured by cj autos
in the UK to high standards



VW CAMPER VAN

The NBN Chassis Tilter bolts to bumper mounting point on the chassis, not the axles. This enables you to lift a complete vehicle with engine and running gear or just a body/chassis unit.

The vehicle can be turned in its own width through 360 degrees

Can be used in a single garage!




Order your bumper mounting brackets to suit - over 300 bumper mounting brackets available (See below for full list)

Two standard beams can be purchased should you wish to save money and make your own brackets.

Car Lifts and Tilters. ct05(1)


HEAVY DUTY NBN

BUY ON LINE CLICK HERE

Heavy Duty Chassis Tilter - CT05

Total safe working load 5000lbs - 2268kg
Weight for transport each end 132lbs - 60kg
Width 1450mm - 57 inches

Car Lifts and Tilters. CT05-3


STANDARD NBN

BUY ON LINE CLICK HERE

Standard Chassis Tilter - CT04
Price: see new web site
Total safe working load 2500lbs - 1134kg
Weight for transport each end 97lbs - 44kg
Width 1220mm - 48 inches

Optional:
Set of 8 castors 4 heavy duty and 4 heavy duty braked and 8 Brackets inc
Telescopic connecting bars to join tilters together when moving about the workshop
CT05A

Standard beams - make your own bumper mounts (These are our popular seller with the tilters
CT05B

Car Lifts and Tilters. CT05-4


HEAVY DUTY NBN

Here we have a heavy duty nbn chassis tilter
turning a VW camper with the greatest of ease


Restoration on a bay by
David T Edwards restorations Manchester

Car Lifts and Tilters. CT05-6


Car Lifts and Tilters. CT05-7

HEAVY DUTY NBN


This is our heavy duty chassis tilters
we made the brackets to suit ..




Car Lifts and Tilters. CT05-8

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
BUY ON LINE CLICK HERE



1.5 ton MINI CAR TILTER
( none adjustable)
CL03

This new car lift
will raise then tilt the car forward or backwards leaving you a massive clearance at the front and rear it works off an electric drill and comes complete with a winding handle so can be used anywhere even if you have no access to a power point .
This lift is great for the home mechanic when repairing front wheel drives suspension and clutches it leaves the area totally free from the lift .
When locked off level all 4 wheels can be removed so all work on the brakes can be carried out

1500kg lifting capacity
Minimum height of 150 mm is needed
Maximum height when level is 585 mm
Saddle size : 80cm x 20.7cm 6″x 31″
Width between the two platforms are 118.5 cm and 155.0 cm
ITEM CODE CL03

Car Lifts and Tilters. CL03-1


1.5 ton MINI CAR TILTER
(adjustable to 3 width sizes )
CL01

Here we have a New mobile 3 IN 1 MINI CAR TILTER

WITH 3 WIDTH ADJUSTMENTS
Lifting capacity – 1500KG
Min height – 15CM
Max height when level – 58.5CM
Platform size – 6″ x31″

Width adjustments can be altered from
410 mm - 750mm ........ EG: Morris Minor, Mgs
770 mm - 1000mm....... EG: Triumph s
1180 mm - 1530mm .....EG: Standard cars

Car Lifts and Tilters. Cl01-1


AIR OVER HYDRAULIC LIFT CL02

This new air over hydraulic lift can be used indoors spray booths outide it is very mobile with wheels fitted.
The design of this lift means it leaves loads of areas free that other lifts encroach.

The middle section is in the shape of a C as to leave areas to take exhausts handbrake cables pipes etc off with ease

The lift will take upto 2500KG use of a compressor of around 7 bar to operate Has 6 different postions to lock off then you can remove the air line because it has no electrics fitted to so then the lift can be left anywhere
Approx size of lift 8x4 with a min height of 120mm so it is so easy to drive over and a max height of over 1000mm from the bottom of the wheels
The lifting arms are fully adjustable as fitted to commercial lifts to get the correct postion for lifting the car -- other lifts have just blocks
ITEM NUMBER CL02

Car Lifts and Tilters. CL02-2


Car Lifts and Tilters. Animated Autovip

//// MOVED



Car Lifts and Tilters. Best Buy

////// MOVING




Car Lifts and Tilters. Colin & Autovip (Animated )

/////MOVED



Car Lifts and Tilters. ct02-22



Car Lifts and Tilters. CT02-4

BUY ON LINE CLICK HERE

Autovip Roller 1400 CT03
Autovip Roller 1700 CT02

aditional extras :-
Knock on adaptors for wire wheels CT03A
3 Adjustable adaptor beams to be able to turn a shell over CT03A



Car Lifts and Tilters. CT03-1

To give you an idea as to how easy it is to operate the AUTOVIP by a single person
CLICK HERE TO SEE FORD ESCORT TURNED IN A SMALL AREA

CLICK HERE TO SEE VW GOLF DEMO

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~



BASIC ROLLER CT01

Features
•A car can be turned by one person using an engine hoist or block and tackle.
• Make sure the battery has been removed and the oil and fluid holes have been blanked off.
•Tip the car with the petrol neck to the top
•BY USING 2 AXLE STANDS YOU CAN KEEP THE BASIC ROLLER AT 90 DEGREES
•You will need approximately 2.5 to 3 metres of space.
•If your garage is not wide enough, our Optional Wheel Kit CT01B, is the answer
. Fit your car to the frame outdoors, turn the car and then just wheel it back into your garage.

MAX WEIGHT 2 .5 TON (2500 KG. )
SUITABLE FOR USE WITH 4 AND 5 STUD WHEELS.
optional extras for cars with 3 stud, wide 5 vw porsche and knock ons

Car Lifts and Tilters. CT01999


Car Lifts and Tilters. CT01XXX



Car Lifts and Tilters. CT01CCC



READY MADE BRACKETS AVAILABLE FOR THE NBN


AC 428 Fua Body
Alfa Romeo Alfasud
Alfa Romeo Giulia GTC
Alfa Romeo GTV Bertone
Alvis TD21
AMC Jeep Cherokee (1972-1983)
Aston Martin DB7
Aston Martin DBS en V8
Audi A6 (1997)
Audi A8 (1997)
Audi Coupe S (1969-1976)
Austin Healey 100/4
Austin A40 Farina
Austin A50
Austin A99 en A110
Austin Healey 3000
Austin Healey Sprite MK.1 (Frog Eye)
Bentley Series 1, 2 en 3 (1955-1965)
BMC 1100/1300
BMC 1800 (1964-1975)
BMC Mini Saloon
BMC Mini traveller en van
Borgward Isabella Coupe
Caterham 7 (K series)
Chevrolet Camaro (1967-1968)
Citroen 2CV en Dyane
Citroen DS
Citroen SM
Datsun 240Z
Datsun 260Z
Datsun 280Z
Datsun Sunny 120Y
Facel Vega Facel 2
Facel Vega HK500 en Excellence
Ferrari 308 GT4
Fiat X1/9 1300
Fiat X1/9 1500
Ford Anglia 105E en 123E (1960-1967)
Ford Capri MK 1, 2 en 3
Ford Cortina MK 1
Ford Cortina MK 3
Ford Cortina MK 4 and 5
Ford Escort MK 1, 2, 3 en 4
Ford Escort MK 3 van en MK 4 van
Ford Mustang (1967-1969)
Ford Thunderbird (1969)
Ford Zodiac MK 3
Hillman Husky
Hillman Imp
Jaguar 420
Jaguar E type series 1
Jaguar E type series 2 en 3
Jaguar MK 2 - Daimler V8 250 1966
Jaguar MK 7, 8 en 9
Jaguar S type
Jaguar XJ6 series 1, 3 en 3
Jaguar XJS (1975-1997)
Jaguar XK140 en XK150
Jensen FF
Jensen Interceptor Series 2
Lancia B20
Lancia B24
Lancia Fluvial coupe series 1
Lancia Monte Carlo
Landrover Defender (1996)
Landrover Discovery (1995)
Landrover Freelander (1996)
London Taxi FX4
Mercedes 190 SL (W121)
Mercedes A Class (1998)
Mercedes W108 (2 doors)
Mercedes W108, 109, 110, 111 en 112, conbinatie beugel voor 2 en 4 doors
Mercedes W109 (2 doors)
Mercedes W110 (2 doors)
Mercedes W110 (4 doors)
Mercedes W111 (2 doors)
Mercedes W111 (4 doors)
Mercedes W112 (2 doors)
Mercedes W112 (4 doors)
Mercedes W113
Mercedes W114 en W115
MG Magnette ZA/ZB
MG Midget 1500 (rubber bumpers)
MG Midget Heritage body
MG Midget MK 1, 2 en 3
MGA
MGB
MGC
Morris Minor Saloon en Traveller
Nissan Skyline GC10
Opel Corsa (1994)
Peugeot 205 Gti
Pontiac Star Chief Custom Convertible (1956)
Porsche 356
Porsche 911 en 912 (1965-1969)
Range Rover (1996)
Renault 18 Station
Renault 5 GT Turbo
Renault Celtaquatre Cabriolet (1937)
Renault Dauphine
Rover P2, 2000 en 2200
Rover P4
Rover P5
Rover P6 3500 (V8)
Rover SDI
Seat Toledo (1991)
Standard 1927 Pall Mall Limousine
Standard Vangard Phase 1
Sunbeam Alpine en Tiger
Talbot Sunbeam Lotus
Triumph 2000 en 2500
Triumph Dolomite
Triumph Herald
Triumph Stag
Triumph TR2, TR3 en TR3A
Triumph TR4, TR4A, TR5 en TR250
Triumph TR6
Triumph TR7, TR7(V8)en TR8
Vanden Plas Princess 3ltr MK 2
Vauxhall (FE Series)
Volvo 120 series
Volvo P1800
VW 411 en 1600 Variant
VW 412
VW Kever 1300
Wolseley 6/99 en 6/110

ABOVE READY MADE BRACKETS AVAILABLE FOR THE NBN


click
©2019 CJ Autos (Heywood) Ltd is powered by Motor-Web
Cookies are set by this site. To decline them or find out more visit our cookie page